How many of you have done a couple dino oil changes before switching to synthetic when breaking in your new rsx?
↧
Breaking in your rsx
↧
Tread Lightly! AZ Trail Clean Up in the Sonoran Desert Nat'l Monument (4/25/15)
Last month we partnered with Tread Lightly! on a project to clean up Table Mesa Recreation Area where 250 volunteers showed up, in the rain,
to pick up trash. Together we removed more than 10 tons of trash from the area! Click HERE to see more about our day cleaning up Table Mesa.
Tread Lightly! is back at it and is hosting another trail clean up day on Saturday, April 25th, 2015 in the Southwest Valley. This is another step
toward keeping our Arizona off-road recreation access open. Please share this info with your family and friends. The more people that help, the
more that can be done. See the information below for more details.
![]()
We need your help!
Join us for a stewardship event on the Sonoran Desert National Monument.
Every Volunteer Counts!
Please bring water, work gloves, hat, sunscreen, trash pinchers, buckets and wear long pants and sturdy shoes. 4WD and OHV vehicles are useful.
to pick up trash. Together we removed more than 10 tons of trash from the area! Click HERE to see more about our day cleaning up Table Mesa.
Tread Lightly! is back at it and is hosting another trail clean up day on Saturday, April 25th, 2015 in the Southwest Valley. This is another step
toward keeping our Arizona off-road recreation access open. Please share this info with your family and friends. The more people that help, the
more that can be done. See the information below for more details.
We need your help!
Join us for a stewardship event on the Sonoran Desert National Monument.
Every Volunteer Counts!
Please bring water, work gloves, hat, sunscreen, trash pinchers, buckets and wear long pants and sturdy shoes. 4WD and OHV vehicles are useful.
- When: Saturday, April 25th, 2015
- Time: 7:30am-12:00pm (Check-in starts at 7:30)
- Where: Gas line/ Power line Road in the Sonoran Desert Nat'l Monument
- RSVP: Sign up online at: http://tinyurl.com/sonorancleanup
- Directions: The area is off of the Gasline/Powerline road that runs along the north side of the N. Maricopa Mountains and is the Northern boundary for the monument.
From Maricopa: (High Clearance vehicles only. Drive will take about 50 minutes to 1 hour from Maricopa to Project Site)
Take Hwy 238 (SR 347 and Smith-Enke/Route 238) west appx. 12.5 miles to Mobile Elementary School at 99th Ave. (between MP 31 and 30). Turn right on 99th Ave. at the school. Drive a short distance. FOLLOW THE ORANGE FLAGGING TO THE LEFT AT THE ROAD FORK; cross cattlegaurd. You are now on the Gasline/Powerline road (aka Komatke Rd). CONTINUE FOLLOWING THE FLAGGING. Continue northwest 5.7 miles along Gasline/Powerline road. Road narrows, cross cattleguard, continue straight on well-graded road 1.3 miles; road curves to right. Continue another 1.3 miles north on graded road (Bullard Ave.) and turn left back onto gasline/powerline road. Drive another 5.2 miles northwest along gasline/powerline road to Project Site/Sign-In Table.
From West Valley Area (Buckeye/Goodyear/Avondale): Drive will take about 30-40 minutes.
Eastbound I-10: Take I-10 East to Exit 123, Citrus Rd/Cotton Ln (West of Loop 303 Interchange.) Drive East on frontage road to Cotton Ln. Turn Right on Cotton Ln.
Westbound I-10: Take I-10 West to Exit 125, Sarival Ave/Cotton Ln (East of Loop 303.) Drive West onI-10 frontage road to Cotton Ln. Turn Left on Cotton Ln.
Once on Cotton Ln, drive South about 6.5 miles to Estrella Pkwy Roundabout. Turn Right on Estrella Pkwy Roundabout; stay on Estrella Pkwy and drive South appx. 3.5 miles to Willis Rd (4-Way Stop). Turn Right on Willis Rd, drive West 1.5 miles to Rainbow Valley Rd. Turn Left on Rainbow Valley Rd and drive South appx. 7 miles. Rainbow Valley Rd ends. FOLLOW ORANGE FLAGGING, and drive the far right two-track dirt road South about ½ mile to the Gasline/ Powerline road and Project Site/Sign-In Table.
- Questions: Contact Dianne Olson at dianne@treadlightly.org or 800-966-9900 ext. #13
↧
↧
Tread Lightly! AZ Trail Clean Up in the Sonoran Desert Nat'l Monument (4/25/15)
Last month we partnered with Tread Lightly! on a project to clean up Table Mesa Recreation Area where 250 volunteers showed up, in the rain,
to pick up trash. Together we removed more than 10 tons of trash from the area! Click HERE to see more about our day cleaning up Table Mesa.
Tread Lightly! is back at it and is hosting another trail clean up day on Saturday, April 25th, 2015 in the Southwest Valley. This is another step
toward keeping our Arizona off-road recreation access open. Please share this info with your family and friends. The more people that help, the
more that can be done. See the information below for more details.
![]()
We need your help!
Join us for a stewardship event on the Sonoran Desert National Monument.
Every Volunteer Counts!
Please bring water, work gloves, hat, sunscreen, trash pinchers, buckets and wear long pants and sturdy shoes. 4WD and OHV vehicles are useful.
to pick up trash. Together we removed more than 10 tons of trash from the area! Click HERE to see more about our day cleaning up Table Mesa.
Tread Lightly! is back at it and is hosting another trail clean up day on Saturday, April 25th, 2015 in the Southwest Valley. This is another step
toward keeping our Arizona off-road recreation access open. Please share this info with your family and friends. The more people that help, the
more that can be done. See the information below for more details.
We need your help!
Join us for a stewardship event on the Sonoran Desert National Monument.
Every Volunteer Counts!
Please bring water, work gloves, hat, sunscreen, trash pinchers, buckets and wear long pants and sturdy shoes. 4WD and OHV vehicles are useful.
- When: Saturday, April 25th, 2015
- Time: 7:30am-12:00pm (Check-in starts at 7:30)
- Where: Gas line/ Power line Road in the Sonoran Desert Nat'l Monument
- RSVP: Sign up online at: http://tinyurl.com/sonorancleanup
- Directions: The area is off of the Gasline/Powerline road that runs along the north side of the N. Maricopa Mountains and is the Northern boundary for the monument.
From Maricopa: (High Clearance vehicles only. Drive will take about 50 minutes to 1 hour from Maricopa to Project Site)
Take Hwy 238 (SR 347 and Smith-Enke/Route 238) west appx. 12.5 miles to Mobile Elementary School at 99th Ave. (between MP 31 and 30). Turn right on 99th Ave. at the school. Drive a short distance. FOLLOW THE ORANGE FLAGGING TO THE LEFT AT THE ROAD FORK; cross cattlegaurd. You are now on the Gasline/Powerline road (aka Komatke Rd). CONTINUE FOLLOWING THE FLAGGING. Continue northwest 5.7 miles along Gasline/Powerline road. Road narrows, cross cattleguard, continue straight on well-graded road 1.3 miles; road curves to right. Continue another 1.3 miles north on graded road (Bullard Ave.) and turn left back onto gasline/powerline road. Drive another 5.2 miles northwest along gasline/powerline road to Project Site/Sign-In Table.
From West Valley Area (Buckeye/Goodyear/Avondale): Drive will take about 30-40 minutes.
Eastbound I-10: Take I-10 East to Exit 123, Citrus Rd/Cotton Ln (West of Loop 303 Interchange.) Drive East on frontage road to Cotton Ln. Turn Right on Cotton Ln.
Westbound I-10: Take I-10 West to Exit 125, Sarival Ave/Cotton Ln (East of Loop 303.) Drive West onI-10 frontage road to Cotton Ln. Turn Left on Cotton Ln.
Once on Cotton Ln, drive South about 6.5 miles to Estrella Pkwy Roundabout. Turn Right on Estrella Pkwy Roundabout; stay on Estrella Pkwy and drive South appx. 3.5 miles to Willis Rd (4-Way Stop). Turn Right on Willis Rd, drive West 1.5 miles to Rainbow Valley Rd. Turn Left on Rainbow Valley Rd and drive South appx. 7 miles. Rainbow Valley Rd ends. FOLLOW ORANGE FLAGGING, and drive the far right two-track dirt road South about ½ mile to the Gasline/ Powerline road and Project Site/Sign-In Table.
- Questions: Contact Dianne Olson at dianne@treadlightly.org or 800-966-9900 ext. #13
↧
Totron Led Light Bars
HTML CODE COPY
Coupon Code for an additional 10% off if you spend $150 or more only for you guys. Code is Lights2015.
Prices in Red are with the 10% discount.
SR Series (Single Row, Straight, Cree LED's)
$94.95 20" 60w 4800lm $85.45
$124.95 30" 90w 7200lm $112.45
DC Series (Double Row, Straight, Cree LED's)
$74.95 6" 36w 2880lm $67.45
$114.95 12" 72w 5760lm $103.45
$149.95 20" 120w 9600lm $134.95
$184.95 30" 180w 14,400lm $166.45
$219.95 40" 240w 19,200lm $197.96
$279.95 50" 288w 23,040lm $251.95
DCX Series (Double Row, Curved, Cree LED's)
$129.95 12" 72w 5760lm $116.95
$159.95 20" 120w 9600lm $143.95
$239.95 30" 180w 14,400lm $215.95
$309.95 40" 240w 19,200lm $278.95
$315.95 50" 288w 23,040lm $284.35
All light bars are combo spot/flood.
These prices include free shipping to the continental US which ship out the same day if ordered by 3pm Central Mon-Fri.
I sell more of the Totron LED's and also Rigid Industries.
You can order them online at Offroad LED's , email me CS@offroadleds.net, or contact me on here.
Coupon Code for an additional 10% off if you spend $150 or more only for you guys. Code is Lights2015.
Prices in Red are with the 10% discount.
SR Series (Single Row, Straight, Cree LED's)
$94.95 20" 60w 4800lm $85.45
$124.95 30" 90w 7200lm $112.45
DC Series (Double Row, Straight, Cree LED's)
$74.95 6" 36w 2880lm $67.45
$114.95 12" 72w 5760lm $103.45
$149.95 20" 120w 9600lm $134.95
$184.95 30" 180w 14,400lm $166.45
$219.95 40" 240w 19,200lm $197.96
$279.95 50" 288w 23,040lm $251.95
DCX Series (Double Row, Curved, Cree LED's)
$129.95 12" 72w 5760lm $116.95
$159.95 20" 120w 9600lm $143.95
$239.95 30" 180w 14,400lm $215.95
$309.95 40" 240w 19,200lm $278.95
$315.95 50" 288w 23,040lm $284.35
All light bars are combo spot/flood.
These prices include free shipping to the continental US which ship out the same day if ordered by 3pm Central Mon-Fri.
I sell more of the Totron LED's and also Rigid Industries.
You can order them online at Offroad LED's , email me CS@offroadleds.net, or contact me on here.
↧
Cheap Totron Dually Cubes & Flush Mounts
These are not the normal Totron cubes but are considered Totron's High Lumen cubes.
All of our prices include Free Same Day Shipping to the lower 48 states.
(You must order by 3pm central. We are open Monday - Friday)
The prices reflect the 10% off when using the code Lights2015 on Offroad LED's
]$67.46 / Pair 18w 3" Cube with 6 Osram LED's. The mount swivels from bottom to back to top. (Left)
.Led Chip, Power: 6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm
$71.96 / Pair 18w 3" Cube Flush Mount with 6 Osram LED's. (Center)
.Led Chip, Power:6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm.Gasket and Template included
$69.95 / Pair 18w 6" Flush Mount Bar with 6 Osram LED's. (Right)
. LED Power: OSRAM 6*3W. Raw Lumen:1620lm. Lux@10m:260lx. Operating Voltage: 10-30V DC. Waterproof rate: IP 67. Current draw:1.4A@12V,0.7A@24V. Color Temperature: 6000K. Material iecast aluminum housing. Lens material:PC. Mounting Bracket: Stainless Steel. Opitonal Beam: 25°. 30000 hours above life time.. Certificates: CE/ IP67/ RoHS
If you want a plug and play harness with a relay, fuse and switch then add $15.
We also have the wireless remote for $19.95
Please pm me with your email address and if you want the harness and remote control.
I will send you a PayPal invoice which you can pay with credit card or anything attached to your PayPal account.
All of our prices include Free Same Day Shipping to the lower 48 states.
(You must order by 3pm central. We are open Monday - Friday)
The prices reflect the 10% off when using the code Lights2015 on Offroad LED's
]$67.46 / Pair 18w 3" Cube with 6 Osram LED's. The mount swivels from bottom to back to top. (Left)
.Led Chip, Power: 6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm
$71.96 / Pair 18w 3" Cube Flush Mount with 6 Osram LED's. (Center)
.Led Chip, Power:6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm.Gasket and Template included
$69.95 / Pair 18w 6" Flush Mount Bar with 6 Osram LED's. (Right)
. LED Power: OSRAM 6*3W. Raw Lumen:1620lm. Lux@10m:260lx. Operating Voltage: 10-30V DC. Waterproof rate: IP 67. Current draw:1.4A@12V,0.7A@24V. Color Temperature: 6000K. Material iecast aluminum housing. Lens material:PC. Mounting Bracket: Stainless Steel. Opitonal Beam: 25°. 30000 hours above life time.. Certificates: CE/ IP67/ RoHS
If you want a plug and play harness with a relay, fuse and switch then add $15.
We also have the wireless remote for $19.95
Please pm me with your email address and if you want the harness and remote control.
I will send you a PayPal invoice which you can pay with credit card or anything attached to your PayPal account.
↧
↧
Offroad Leds
Hey everyone, I'm new to the forums but I will be on here daily. I just became a sponsored vendor and we are an authorized dealer in: Totron LED's, Rigid Industries LEDs, Wetsounds & BlueFire Whips. We also are a full motorcycle/atv parts and apparel shop specializing in motorcycle helmets. We have a retail store located near Houston, TX but we are setup for shipping, so hit me up with what you want and we can normally ship it the same day.
Come check us out at Offroad LED's
Come check us out at Offroad LED's
↧
Identification help
I am trying to identify the year of manufacture of a gator 4x2 with ID number W004X2X044256. Thanks
↧
2013 Gator RSX 850i Sport will not idle
I'm new to this forum so I wasn't sure where exactly I needed to post this question, but my gator went from running fine to where it will not idle. It seems to me it even runs a little rough above idle. I have to have the pedal down a little to get it to crank up and below 1100 rpms it will die. I had a friend pressure wash it and it ran fine for a few minutes after, but when I tried to crank it back up it started acting up. I'm not sure if it has anything to do with him pressure washing it or if this is a problem other people have had to. I really don't know where to start. I've tried messing with it a little, but I was hoping someone on here has had similar issues. I don't know anyone that has a gator sport and I know the engines in these are different then the utility models so I was reaching out on here hoping someone has the same bike as mine. It only has 80 hours on it. Any info would be appreciated on how to fix this problem.
↧
2013 Gator RSX 850i Sport will not idle
I'm new to this forum so I wasn't sure where exactly I needed to post this question, but my gator went from running fine to where it will not idle. It seems to me it even runs a little rough above idle. I have to have the pedal down a little to get it to crank up and below 1100 rpms it will die. I had a friend pressure wash it and it ran fine for a few minutes after, but when I tried to crank it back up it started acting up. I'm not sure if it has anything to do with him pressure washing it or if this is a problem other people have had to. I really don't know where to start. I've tried messing with it a little, but I was hoping someone on here has had similar issues. I don't know anyone that has a gator sport and I know the engines in these are different then the utility models so I was reaching out on here hoping someone has the same bike as mine. It only has 80 hours on it. Any info would be appreciated on how to fix this problem.
↧
↧
Rusty Oil Dipstick
I have been going back and forth on what machine to buy for over a year i finally decided on a 850rsx imy buddy works at a JD dealership and told me that another store has a 2012 850 with less than 100 miles on for a reasonable price with the 6 month warranty but he hasnt seen it but was told it looked brand new. I call worked out the price and they delivered it ,before I started it i checked the air cleaner and it was filthy, i checked the iol and the dipstick was rusty ,the oil looks to be clean but im thinking to tell them to come take it back just checking on any suggestions.
↧
Gas milage 825
So what are you getting out of a full tank in your 825? I understand milage will vary by use, just looking for a average.
↧
Structural issues ?
Has anyone noticed or experienced any frame or structural issues in the front end of their rig? Particularly in the area where the front A arm bracket is welded to the frame? I gave mine a good bath over the weekend and on both side I noticed that the powder coat was gone and closer inspection found hairline cracks in the welds.
↧
Stock Exhaust Needed
I have a 2013 RSX 850i and I am in need of a stock John Deere Exhaust for it. I'm a set medic in the movie business and use my JD for work. It has the Big Gun exhaust on it and its way too loud. It sounds like a untuned Harley with straight pipes.
Does anyone have their stock system left over that they want to get rid of?
Thanks...
Does anyone have their stock system left over that they want to get rid of?
Thanks...
↧
↧
New To Forum, Need stock exhaust
Hey,
I'm new to the Forum, traded another member here for their RSX.
I'm a set medic in the movie business and use my 850i for work. I'm looking for a stock exhaust setup for it. It has the Big Gun dual system on it and its way too loud. I posted in the for sale section too...
I'm new to the Forum, traded another member here for their RSX.
I'm a set medic in the movie business and use my 850i for work. I'm looking for a stock exhaust setup for it. It has the Big Gun dual system on it and its way too loud. I posted in the for sale section too...
↧
moved bench seat 1.5"
I moved the bench ahead 1.5 on my 855d . much better now.
it took some welding but got it done.
jim
it took some welding but got it done.
jim
↧
XUV 550 clutch issues
Hey all. Im new to this forum, I bought an xuv 550 this winter and have been having issues with it not shifting after it warms up. I see this seems to be a common issue with this model and am wondering if anyone knows the turnaround time on repairs. It is in for warranty right now and Im hoping to get it back in time for my holidays.
↧
Bed fitment, 2011 hpx
I bought a 2011 hpx diesel gator. The bed is rusted out. I found an electric gator i could buy for cheap. Would the bed on the electric fit my hpx? Thank you!
↧
↧
Totron Led Light Bars
Coupon Code for an additional 10% off if you spend $150 or more only for you guys. Code is Lights2015.
Prices in Red are with the 10% discount.
SR Series (Single Row, Straight, Cree LED's)
$94.95 20" 60w 4800lm $85.45
$124.95 30" 90w 7200lm $112.45
DC Series (Double Row, Straight, Cree LED's)
$74.95 6" 36w 2880lm $67.45
$114.95 12" 72w 5760lm $103.45
$149.95 20" 120w 9600lm $134.95
$184.95 30" 180w 14,400lm $166.45
$219.95 40" 240w 19,200lm $197.96
$279.95 50" 288w 23,040lm $251.95
DCX Series (Double Row, Curved, Cree LED's)
$129.95 12" 72w 5760lm $116.95
$159.95 20" 120w 9600lm $143.95
$239.95 30" 180w 14,400lm $215.95
$309.95 40" 240w 19,200lm $278.95
$315.95 50" 288w 23,040lm $284.35
All light bars are combo spot/flood.
These prices include free shipping to the continental US which ship out the same day if ordered by 3pm Central Mon-Fri.
I sell more of the Totron LED's and also Rigid Industries.
You can order them online at Off Road LED's - LED Light Bars - Totron , email me CS@offroadleds.net, or contact me on here.
Prices in Red are with the 10% discount.
SR Series (Single Row, Straight, Cree LED's)
$94.95 20" 60w 4800lm $85.45
$124.95 30" 90w 7200lm $112.45
DC Series (Double Row, Straight, Cree LED's)
$74.95 6" 36w 2880lm $67.45
$114.95 12" 72w 5760lm $103.45
$149.95 20" 120w 9600lm $134.95
$184.95 30" 180w 14,400lm $166.45
$219.95 40" 240w 19,200lm $197.96
$279.95 50" 288w 23,040lm $251.95
DCX Series (Double Row, Curved, Cree LED's)
$129.95 12" 72w 5760lm $116.95
$159.95 20" 120w 9600lm $143.95
$239.95 30" 180w 14,400lm $215.95
$309.95 40" 240w 19,200lm $278.95
$315.95 50" 288w 23,040lm $284.35
All light bars are combo spot/flood.
These prices include free shipping to the continental US which ship out the same day if ordered by 3pm Central Mon-Fri.
I sell more of the Totron LED's and also Rigid Industries.
You can order them online at Off Road LED's - LED Light Bars - Totron , email me CS@offroadleds.net, or contact me on here.
↧
Cheap Totron dually cubes and flush mounts!!
These are not the normal Totron cubes but are considered Totron's High Lumen cubes.
All of our prices include Free Same Day Shipping to the lower 48 states.
(You must order by 3pm central. We are open Monday - Friday)
The prices reflect the 10% off when using the code Lights2015 on Offroad LED's
$67.46 / Pair 18w 3" Cube with 6 Osram LED's. The mount swivels from bottom to back to top. (Left)
.Led Chip, Power: 6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm
$71.96 / Pair 18w 3" Cube Flush Mount with 6 Osram LED's. (Center)
.Led Chip, Power:6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm.Gasket and Template included
$69.95 / Pair 18w 6" Flush Mount Bar with 6 Osram LED's. (Right)
. LED Power: OSRAM 6*3W. Raw Lumen:1620lm. Lux@10m:260lx. Operating Voltage: 10-30V DC. Waterproof rate: IP 67. Current draw:1.4A@12V,0.7A@24V. Color Temperature: 6000K. Material iecast aluminum housing. Lens material:PC. Mounting Bracket: Stainless Steel. Opitonal Beam: 25°. 30000 hours above life time.. Certificates: CE/ IP67/ RoHS
If you want a plug and play harness with a relay, fuse and switch then add $17.96
We also have the wireless remote for $19.76
Please pm me with your email address and if you want the harness and remote control.
I will send you a PayPal invoice which you can pay with credit card or anything attached to your PayPal account.
All of our prices include Free Same Day Shipping to the lower 48 states.
(You must order by 3pm central. We are open Monday - Friday)
The prices reflect the 10% off when using the code Lights2015 on Offroad LED's
$67.46 / Pair 18w 3" Cube with 6 Osram LED's. The mount swivels from bottom to back to top. (Left)
.Led Chip, Power: 6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm
$71.96 / Pair 18w 3" Cube Flush Mount with 6 Osram LED's. (Center)
.Led Chip, Power:6*3W Osram.Actual Power: 16.83W under 24VDC.Operating Voltage:10-30V DC.Current Draw: 12V/1.4A,24V/0.7A.Waterproof Rate:IP67.Color Temperature:6000K.Beam Pattern: Flood/90° Spot/8°.Theoretical Lumen: 1440lm.Effective Lumen: 930lm.Gasket and Template included
$69.95 / Pair 18w 6" Flush Mount Bar with 6 Osram LED's. (Right)
. LED Power: OSRAM 6*3W. Raw Lumen:1620lm. Lux@10m:260lx. Operating Voltage: 10-30V DC. Waterproof rate: IP 67. Current draw:1.4A@12V,0.7A@24V. Color Temperature: 6000K. Material iecast aluminum housing. Lens material:PC. Mounting Bracket: Stainless Steel. Opitonal Beam: 25°. 30000 hours above life time.. Certificates: CE/ IP67/ RoHS
If you want a plug and play harness with a relay, fuse and switch then add $17.96
We also have the wireless remote for $19.76
Please pm me with your email address and if you want the harness and remote control.
I will send you a PayPal invoice which you can pay with credit card or anything attached to your PayPal account.
↧
Gator Spits and Sputters
I have a 625I fuel injected gator that spits and sputters after it get warmed up. Fuel line is clean, tank clean, filter new, plus replaced. Dealer wired the fan to run all of the time, but that did not help. Water temp is good, hot light never comes on.
Any ideas as to what it could be.
Any ideas as to what it could be.
↧