I have a 2014 RSX with a SuperATV 2" lift kit installed and factory tires. I use this to trail ride and install food plots. I am on my 5th L/R axle in 1800 miles. The original axle lasted about 1300 miles but only had 200 miles with lift kit installed. I replaced with a JD axle and that one started on fire after about 100 miles. I replaced the axle again with an American CV axle and that one failed in the first 6 miles. American CV replaced it under warranty so I put another one in witch lasted about 400 miles. I replaced it again and last night the CV boot melted after about 18 miles. Looking for ideas what could be causing these failures. Both rear axles get so hot you can not touch them. I did notice that the L/R wheel seems to drive the machine. A friend of mine has a 2012 with the same lift kit and has 9000 miles on his and no axle failures. Thanks
↧