Just fabricated a snorkel for the air intake only, cost about $25 (haven't got the radiator hose bill yet, but allowed $15 of the $25 build cost). Was easy and took about a hour. Parts list: 3"x2" plumbing rubber adapter(comes with 2 stainless steel clamps)$4.59, 3 ninety degree elbows ($1.39 each), 30" of 2" schedule 40 PCV pipe, cut off 3" to use later ($1.69 per foot), 3 -12" zip ties, 9-1/2" x2" NAPA radiator hose (part# FM66) price to be determined later. Some black electrical tape to wrap the radiator hose end to fit the 1st 90 degree elbow snugly. I cut the end off the factory air tube at the second rib, slide the adapter up to the 3rd rib and tighten the clamps. You can use the 3rd elbow and 3" of the 2" pipe and make the snorkel end a 180 degree end if you want, I carry it along incase it rains hard I can install it in a hurry.
↧