My gator won't start at all. No sound at all when turning the key. The lights and horn don't even work when key is in RUN position. I am assuming a bad ignition switch. I pulled the switch and did some continuity tests. I have a 6-node, 3-position Indak switch. Only 4 of the 6 nodes have stamps on them. They are M, G, B, and G (yes, two G's).
I got the following results from my testing:
- Key in OFF position, continuity from G to M (this is good)
- Key in RUN position, NO continuity from B to any other node (this is bad)
- Key in START position, continuity from B to one of the G nodes (this is good)
My question is the following....
If there is no continuity from B to any other node when the key is in the RUN position, I assume that is why lights and horn don't work, but would that also prevent the gator from starting AND keep it from running?
I got the following results from my testing:
- Key in OFF position, continuity from G to M (this is good)
- Key in RUN position, NO continuity from B to any other node (this is bad)
- Key in START position, continuity from B to one of the G nodes (this is good)
My question is the following....
If there is no continuity from B to any other node when the key is in the RUN position, I assume that is why lights and horn don't work, but would that also prevent the gator from starting AND keep it from running?