So I purchased the SuperATV lift for my RSX (Fox 2.0 shocks) and installed it over the holidays. An interesting note:, the Maxxis Bighorn 2.0 tires actually only measure 25.1 vs the advertised 26 with 14 psi. Thought I would share some of my findings:
· When I first purchased my RSX last summer, I measured the clearance frt and back. It had about 9.75 on both frt and rear.
· A few months later with some miles on it, the springs had sagged somewhat, so I cranked up the stops on the springs, and got it back to about 9.75-10 of clearance. This involved turning the spring stops all the way to the thin stopwashers.
· Prior to installing the lift kit, I measured frt and rear clearance, and got 9.5 on the frt and 10 on the back
· When I first purchased my RSX last summer, I measured the clearance frt and back. It had about 9.75 on both frt and rear.
· A few months later with some miles on it, the springs had sagged somewhat, so I cranked up the stops on the springs, and got it back to about 9.75-10 of clearance. This involved turning the spring stops all the way to the thin stopwashers.
· Prior to installing the lift kit, I measured frt and rear clearance, and got 9.5 on the frt and 10 on the back