Hey all . I picked a real clunker of a 4x2 . Tried to get it to drive and 1 wheel moves, but the other wheel seems to be locked up.I put in neutral and can’t even push it . 1 wheel is still stuck. I checked the brakes . Left side moves, right wheel has no brakes. The lever that ‘s
Supposed to be connected to the brake rod is not connected . It has no resistance at all . I’ve had gator trannies on the ground out of machines and the brake levers have resistance and you can’t spin the axle unless you push it obviously the direction away from the resistance and then the axle spins . Someone put what looks a 10 speed bicycle cable on the low lock lever .it looks too tight . I wonder if it could be between lock and unlock if the cable is too short .
I also would like some advice on opening the trans up if I have too . Is there a trans schematic I can get a hold of ? Thanks for any help .
Supposed to be connected to the brake rod is not connected . It has no resistance at all . I’ve had gator trannies on the ground out of machines and the brake levers have resistance and you can’t spin the axle unless you push it obviously the direction away from the resistance and then the axle spins . Someone put what looks a 10 speed bicycle cable on the low lock lever .it looks too tight . I wonder if it could be between lock and unlock if the cable is too short .
I also would like some advice on opening the trans up if I have too . Is there a trans schematic I can get a hold of ? Thanks for any help .