Sometimes you buy an item with some trepidation. This was the case for me with the cargo box divider (BM22769). I had not seen one in person and was not sure what would be required for installation.
The kit is really simple to install, only requires tightening four bolts (10mm socket). No modification to the gator is required.
There are two clamps in the kit, each one is bolted to a U shaped channel. On the first u channel, bolt the clamp on the right side, on the second u channel bolt the clamp on the left side. The clamps are designed to clamp onto the cargo box rails. Once you clamp the u channels on opposite sides of the bed. The main divider slides into the U channels. You then install the 2 small dividers into one of seven locations.
Needless to say my trepidation was unwarranted. :)
The kit is really simple to install, only requires tightening four bolts (10mm socket). No modification to the gator is required.
There are two clamps in the kit, each one is bolted to a U shaped channel. On the first u channel, bolt the clamp on the right side, on the second u channel bolt the clamp on the left side. The clamps are designed to clamp onto the cargo box rails. Once you clamp the u channels on opposite sides of the bed. The main divider slides into the U channels. You then install the 2 small dividers into one of seven locations.
Needless to say my trepidation was unwarranted. :)