I know it's most likely a pet peeve of xcopterdoc for us to ask questions without doing a little research BUT the schematics he's sent me and the gator manual do not show the lift bed wiring. When I first started working on my gator the lift bed did not work. I found most of the relays in the gator were just loaded with dirt and once I cleaned all the connections everything came back to life. Recently I raised my bed to dump a load of rock and it wouldn't come back down. I tried to swap the up/down relays but that didn't work. I disconnected the bed from the lift and tried again, I can here the clicking of the relays but no movement. I'm thinking the motor on the lift might have finally failed but before spending money on a new one I was hoping for a Aaron Rogers hail marry to save me:)
↧