Hi folks,
My first post/request: My unit has a auxiliary power connectors under the hood and under the box. Both are always hot and separately fused at 40 amps. (Typical use, winch and power box lift, if equipped.) The push style connectors are female and in this configuration:
OOOOOOOOOO
O | O | O
O | O | O
O | O | O
OOOOOOOOOO
~1/2 x 7/8" Sorry, the text didn't render correctly. Pos and neg are the same size and the connector is off set of the middle on each side.
I don't have a JD green or yellow dealer anywhere close and can't find a reference to this style of connector anywhere on the net. There is an electrical supply an hour away but I'm not keen on cutting the connector off the harness to see if they can match it up.
Has anyone found a cross reference or JD p/n for this?
Best,
Jim
My first post/request: My unit has a auxiliary power connectors under the hood and under the box. Both are always hot and separately fused at 40 amps. (Typical use, winch and power box lift, if equipped.) The push style connectors are female and in this configuration:
OOOOOOOOOO
O | O | O
O | O | O
O | O | O
OOOOOOOOOO
~1/2 x 7/8" Sorry, the text didn't render correctly. Pos and neg are the same size and the connector is off set of the middle on each side.
I don't have a JD green or yellow dealer anywhere close and can't find a reference to this style of connector anywhere on the net. There is an electrical supply an hour away but I'm not keen on cutting the connector off the harness to see if they can match it up.
Has anyone found a cross reference or JD p/n for this?
Best,
Jim