I have an RSX850i with a new engine. Machine was purchased, and engine was toasted within 5 hours of purchase. Thank goodness there was aftermarket warranty bought. There is about 20 hours on the new engine, and the machine smokes like crazy.
-Checked oil in machine, oil was not on dipstick. Changed engine oil and filter.
-Cleaned connection at ECU.
-Replaced oil vent hose that had burnt in two
-Valves are all set to .006-.007 in. which is spec
-Cleaned large amounts of corrosion and acid off battery posts
-Cylinder leakage test showed no terrible results. 10-15% on each side
After all of this, the engine still smokes a very large amount. Any fuel problems causing smoking that I am not aware of?
-Checked oil in machine, oil was not on dipstick. Changed engine oil and filter.
-Cleaned connection at ECU.
-Replaced oil vent hose that had burnt in two
-Valves are all set to .006-.007 in. which is spec
-Cleaned large amounts of corrosion and acid off battery posts
-Cylinder leakage test showed no terrible results. 10-15% on each side
After all of this, the engine still smokes a very large amount. Any fuel problems causing smoking that I am not aware of?